Eibach Sportline Chassis Springs Bmw 3er Saloon E90 From Yr 1.2005- 955/1135 Kg
Eibach Sportline Chassis Springs BMW 3er Saloon E90 from Yr 1.2005- 955/1135 KG. The description of this item has been automatically translated. Eibach Sports Line Performance suspension springs sport for. Eibach SportlinePerformance Springs Sport for. Axle load in kg front / rear: Max. Axle load in kg front / back: 955/1135. Lowering in mm front / rear approx. Lowering in mm front / back approx.
An example of a new registration certificate can be found as a sample image added to the item description above. With the four-digit HSN (MPN) and the 3-digit TSN (Type code number, the first 3 characters) you can check which items from our shop fit your vehicle and are suitable for you. See vehicle list input above! You will find these numbers under 2.1 and 2.2 in your registration certificate part I (vehicle registration), in our picture above in red marked. Please check the afterwards Axle loads at the front and rear , and compare them with our description. In your registration certificate (vehicle registration) these are listed under 7.1 and 7.2 listed. (You can find this in the example picture "Vehicle registration" above blue marked). If different or you are unsure, please ask our qualified service team! Note table: Please refer to the product description above for the relevant information. German: If not specified separately, the lowering specified in the catalog is reduced by the amount of the factory lowering for vehicles equipped with a sports suspension ex works. If not listed separately, vehicles that are equipped with a higher chassis ex works e. Off-road character, crossover or rough road packages are excluded from the use of our products. For the article / vehicle assignment, the information in the parts certificate or ABE is decisive. For this purpose, the EC type-approval number point K on the vehicle registration certificate or on the vehicle's nameplate!
Must be compared with the information in the report. Before installation, please check by means of a parts certificate / ABE whether the delivered items (see parts identification) are approved for your vehicle (see area of application). We recommend that our products be installed only in a qualified workshop that has the appropriate trained personnel and the required special tools. You can "read" the installation position from the printing - have the spring installed so that you can read the printing. The number must not be upside down. After the spring / chassis components have been installed, it is imperative to check the wheel settings. If the series shock absorbers are no longer fully functional and have noticeably weakened in their effect, we strongly recommend replacing them with new series shock absorbers or sports shock absorbers. Lowering performance is negatively affected by worn or defective dampers. If you need new dampers, we would be happy to advise you. With Sportline springs we recommend the installation of sports shock absorbers such as Bilstein B8. All wheels / tire combinations that have been approved by the wheel type inspection centers can be used. The conditions in the wheel report or Wheels ABE are to be observed, with the exception of the requirement for series chassis. Depending on the engine, transmission, equipment and tolerances of the vehicle, the lowering may deviate by a few mm from the specified values. The amount of lowering is always reduced by the amount of a factory lowering. The usability of our products relates to vehicles left in series production. For conversions and special accessories also applies to series accessories!
Such as the installation of a special brake system e. Ceramic brake system, central wheel lock, sports suspension, LPG system etc.
Our products may not be usable. The dimensions given refer to new vehicles left in series production. Measuring points: Vertical distance from the center of the wheel hub to the lower edge of the fender. Basically, the specified dimensions are target values, which can vary depending on the vehicle.
If the standard suspension has electronic damper control, its functionality is not available when using B12 or Pro Street S suspensions. An authorized workshop can turn off the error message displayed in the on-board computer.
If available for your vehicle, we recommend using Pro-Tronic to suppress the error message. Except vehicles with level control. Except vehicles with all-wheel / 4WD drive. Except vehicles with electronically controlled damper force adjustment. For a lowering of more than 40 mm and a diameter of the right drive shaft larger than 42 mm, eventl. The series stabilizer can be replaced. The stabilizer set required here is available under Eibach part no. E40-85-005-01-10 available in well stocked specialist shops.
For export only, not available in Germany. Not for "Nürburgring-Edition" (211 PS). Only for vehicles with S-Line chassis as standard. Only for vehicles without S-Line chassis as standard. Service information: Please refer to the product description above for applicable instructions.
If not separately named, vehicles with OE-lifted suspension (eg Offroad-Package, Crossover) are excluded from use of our products. The specifications indicated in the approval are for the classification of the item / vehicle. Please check the type approval number of your car and compare with the approval.
The performance of new lowering suspension will be with no optimum result by using old, strong used or broken shock absorbers. If you need news shock absorbers we could support you if necessary. The installation of Sport-Shock Absobers is recommended. As example Bilstein B8 Here all wheel / tire combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel approval have to be adhered to, except for: OE suspension is required. Depending on engine, gearbox / transmission, equipment and vehicle tolerances lowering may differ from the values given. The applicability of our products deals with standard cars.
In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (eg ceramic-brakes), sport-suspension, LPG- (liquefied petroleum gas) -system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing.
When the car is lowered more than 40 mm in combination with a drive shaft diameter more than 42 mm, the original equiped front stabilizer bar has to be replaced by the EIBACH Anti-Roll-Kit part. Not suitable for model "Cross". Increased axle-load when using trailer (see approval). For cars with independent suspension at the rear axle.
For cars with rear live axle. For vehicles without AMG suspension. Only Export - nor available in Germany - only without Components Certificate! Not for "Nürburgring Edition" (211 HP). Only for vehicle with S-Line suspension.
Only for vehicle without S-Line suspension. Articles you may still be interested in. Eibach Pro-Kit suspension springs for BMW 3 Series Limo E46 02.1998-04.2005 970/1100 kg. Original RGM bumper protection ABS black Dacia Sandero II also stepway from 2012. Original RGM bumper protection ABS black Ford Kuga I SUV estate 03.2008-02.2013.
Original RGM bumper protection ABS black VW Golf VI Cabriolet from year of construction 03.2011. Original RGM bumper protection smooth ABS black VW T5 m. Original RGM bumper protection ABS black VW Caddy IV also Maxi from Bj.
Original RGM bumper protection ABS black VW Caddy painted bumper 2004-15. Original RGM bumper protection ABS black Opel Mokka X SUV from facelift 07.2016. Certificate n °:E2020014 EAN:GTIN:4050278009249 GERMAN ENGLISH Example of a vehicle registration: A. General information 18 Except vehicles with level control. 20 Except vehicles with all-wheel / 4WD drive.
21 26 58 not suitable for model variant "Cross" 68 170 171 181 for vehicles without AMG chassis 210 212 Not for "Nürburgring-Edition" (211 PS) 236 237 A. CommonNotes 18 Without leveling control. 20 Except vehicels with 4WD. 21 Except electronic suspension systems. 26 58 not suitable for model "Cross" 68 170 171 For cars with rear live axle. 181 for vehicles without AMG suspension 210 212 Not for "Nürburgring Edition" (211 HP) 236 237 Articles you may still be interested in VAT. Maximale Achslast vorne/hinten 955/1135 kg. The item "Eibach Sportline Chassis Springs BMW 3er Saloon E90 from Yr 1.2005- 955/1135 KG" is in sale since Sunday, September 15, 2019. This item is in the category "Vehicle Parts & Accessories\Car Parts\Suspension & Steering\Coil Springs". The seller is "spangenberg-shop" and is located in Tornesch, Schleswig-Holstein.
This item can be shipped to all countries in Europe.
- Placement on Vehicle: Front
- EAN: 4050278009249
- Reference OE/OEM Number: O1120915N
- Manufacturer Part Number: E20-20-014-02-22-A
- Country/Region of Manufacture: Germany
- Reference Number OE: Vehicle Styling, Tuning, Sport Line, Lowering Springs, E90, 3
- Manufacturer Warranty: 2 Years
- Unit Quantity: Set Of 4
- Unit Type: Suspension
- Manufacturer: Eibach
- Brand: Unbranded