Eibach Pro-kit Chassis Springs Vw Passat Saloon B6 3c 3c2 2005-10 1180/1160kg
Eibach Pro-Kit Chassis Springs VW Passat Saloon B6 3C 3C2 2005-10 1180/1160kg. The description of this item has been automatically translated.
Eibach Pro kit Performance suspension springs for. Eibach Pro-Kit Performance Springs for. Axle load in kg front / rear: Max. Axle load in kg front / back: 1180/1160. Lowering in mm front / rear approx. Lowering in mm front / back approx. Engine types: Motor Types: 1.4 TSI / 1.8 TSI / 2.0 FSI / 2.0 TSI / 3.6 FSI / 1.6 TDI / 1.9 TDI / 2.0 TDI / 2.0 TDI 16V / 2.0 BlueTDI. Certificate / ABE: Certificate / ABE: with general operating permit ABE - registration free! Cardboard box in mm: Cardboard packaging in mm: 636x377x170. Weight in kg net / gross: Weight in kg net / large: 11,200 / 11,700.
The first choice of motorsport fans from all over the world. Eibach PRO-KIT Performance Springs # 1 Choice of Automotive Enthusiasts Worldwide! Example of a vehicle registration. How do I check if this item is correct for my vehicle? Three simple steps that you can check yourself with the help of your registration certificate and the vehicle registration document.
An example of a new registration certificate can be found as a sample image added to the item description above. See entry above in the vehicle list! You will find these numbers under 2.1 and 2.2 in your registration certificate part I (vehicle registration), in our picture above in red marked.
Then check the Axle loads front and rear , and compare them with our description. In your registration certificate (vehicle registration) these are listed under 7.1 and 7.2 listed. (You can find this in the example picture "Vehicle registration" above blue marked).
If different or you are unsure, please ask our qualified service team! Note table: Please refer to the product description above for the relevant information. German: If not specified separately, the lowering specified in the catalog is reduced by the amount of the factory lowering for vehicles that are equipped with a sports suspension ex works. If not listed separately, vehicles that are equipped with a higher chassis ex works e.
Off-road character, crossover or rough road packages are excluded from the use of our products. The information in the parts certificate or the ABE is decisive for the article / vehicle assignment. For this purpose, the EC type-approval number point K on the vehicle registration document or on the vehicle's nameplate! Must be compared with the information in the report. Before installation, please check by means of a parts certificate / ABE whether the delivered items (see parts labeling) are approved for your vehicle (see area of application).
The current parts certificate / ABE´sen can be found at www. We recommend that our products be installed only in a qualified workshop with the appropriate trained personnel and the required special tools. You can "read" the installation position from the printing - have the spring installed so that you can read the printing. The number must not be upside down.
After the spring / chassis components have been installed, it is imperative to check the wheel settings. If the series shock absorbers are no longer fully functional and have noticeably weakened in their effect, we strongly recommend replacing them with new series shock absorbers or sports shock absorbers. Lowering performance is negatively affected by worn or defective dampers.
The conditions in the wheel report or Wheels ABE are to be observed, with the exception of the requirement for series chassis. Depending on the engine, transmission, equipment and tolerances of the vehicle, the lowering may deviate by a few mm from the specified values. The amount of lowering is always reduced by the amount of a factory lowering. The usability of our products relates to vehicles left in series production.
Measuring points: Vertical distance from the center of the wheel hub to the lower edge of the fender. Basically, the dimensions given are target values, which can vary depending on the vehicle. If the standard suspension has electronic damper control, its functionality is not available when using B12 or Pro Street S suspensions. An authorized workshop can turn off the error message displayed on the on-board computer. If available for your vehicle, we recommend using Pro-Tronic to suppress the error message.
The factory installed spring plates are available in thicknesses 8-23mm in DB specialist workshops. This allows the lowering specified here to be varied. With 205/50/15 tires and 7 J x 15 rims - recommendation: installation of identical sports gas pressure shock absorbers. If necessary, please request a source from our central administration. Not usable with lowering at the factory.
The special equipment considered here includes the following points system: Air conditioning 7 points automatic transmission 4 + 5 cyl. 4 point automatic transmission 6 cyl. 2 points of additional heating 3 points of sunroof 2 points of ABS 2 points of airbag 1 point of headlamp cleaning system 1 point of motor protection 1 point of electronic seat adjustment 2 points of the combination of the additional equipment more than 4 additional points , the lowering kit is to be used for vehicles with special equipment. The choice of rubber pads results from the following values: Up to and including 7 points 8 mm (1 nub) Up to and including 13 points 13 mm (2 nubs) Up to and including 21 points 23 mm (4 nubs) More than 21 points The lowering kit is not suitable for this version.
Except vehicles with level control. Vehicles with 6-cylinder engines must be converted to sport dampers. Except vehicles with all-wheel / 4WD drive. Except vehicles with electronically controlled damper force adjustment.
For a lowering of more than 40 mm and a diameter of the right drive shaft larger than 42 mm, eventl. The series stabilizer can be replaced.
The stabilizer set required here is available under eibach part no. E40-85-005-01-10 available in well stocked specialist shops. Except the special models "Sportiv" and "Sport" (vehicles with Bilstein shock).
The spring-dependent brake pressure regulator on the rear axle must be checked in accordance with the specifications in the workshop manual and, if necessary, be reset. The dampers of the HA are to be replaced by the supplied dampers.
On vehicles with a combined fog lamp and position lamp, check whether the lower edge of the headlamp is lower than 350 mm above the ground. If this is the case, additional position lamps must be installed above this dimension.
Not suitable for COLT Rallyart from 2009. Check: this kit fits: 10. Digit = letter A, B.... Increased axle load for trailer operation (see parts certificate). If there is an individual operating license, an acceptance according to §19 / 2 StVZO is required. Not suitable for version 1.6 Racing (DS3). Not for "Caddy Maxi" version. Also for version "LPG" (gas system). Only for vehicles with PASM (electronic damper control). For vehicles with multi-link rear axle (independent wheel suspension). For vehicles with torsion beam rear axle (rigid axle). Category M1G vehicles (off-road vehicles) must be rewritten as M1 vehicles (passenger cars).
For vehicles without AMG chassis. For vehicles with AMG chassis. Spring plates may have to be replaced. With kit E8530-140, the existing spring plate may have to can be exchanged for original spring retainer no: 1HO412341. For sets E8547-140 and E8550-140, the existing spring plate may need can be exchanged for original spring plate no. Only for vehicles without air suspension.
For export only, not available in Germany. For version with long wheelbase. Not for "Nürburgring-Edition" (211 PS).
Only for vehicles with range extenders. Not for "plug-in hybrid" version. Service information: Please refer to the product description above for applicable instructions. If not separately named, vehicles with OE-lifted suspension (eg Offroad-Package, Crossover) are excluded from use of our products. The specifications indicated in the approval are for the classification of the item / vehicle. Please check the type approval number of your car and compare with the approval. Letter K in your vehicle registration certificate or to find at the type plate of your car!
Please verify before fitting by means of the approval whether the delivered items (please see marking) are approved for your vehicle (please see area of use). You can find the current approval on www.
The performance of new lowering suspension will be with no optimum result by using old, strong used or broken shock absorbers. If you need news shock absorbers we could support you if necessary.
The applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (eg ceramic-brakes), sport-suspension, LPG- (liquefied petroleum gas) -system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars.
Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.
If your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage / dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.
This allows to vary the lowering indicated here. For tire equipment 205/50/15 and rim 7J x 15. Recommendation: installation of SPORTS gas pressure shock absorbers of similar construction. Part number is available only from our special distributor. Please ask for availability and price.
The special equipment mentioned below contents following point system: air-condition 7 points automatic-transmission 4 + 5 cyl. 4 points automatic-transmission 6 cyl. 2 points independent car heating 3 points sunroof 2 points ABS 2 points airbag 1 point headlamp cleaning system 1 point engine skid plate 1 point electronic seat adjustment 2 points IF THE RESULT IS MORE THAN 4 POINTS ONE HAS TO CHOICE up to 7 points 8 mm (1 point rubber plate) up to 13 points 13 mm (2 point rubber plate) up to 21 points 23 mm (4 point rubber plate) More than 21 points the lowering Kit is for this version not possible. Vehicles with 6 cylinder engine require retrofit with SPORTS shocks. When the car is lowered more than 40 mm in combination with a drive shaft diameter more than 42 mm, the original equiped front stabilizer bar has to be replaced by the eibach Anti-Roll-Kit part.
Except models "Sportive" and Sport (models were are equipped with bilstein shock absorbers). The spring travel dependent brake-pressure regulator at the rear axle has to be inspected and, if necessary, adjusted according to the workshop manual. The original rear dampers have to be replaced by the supplied dampers. Vehicles with combined fog and running lights have to be checked whether the height of the lower edge of the light is not closer than 350 mm to the ground.
In this case additional running lights have to be mounted higher thand 350 mm. The original running lights have to be decomissioned by removing the bulbs an the cable connection. Not suitable for model "Cross". Only for vehicles with following characteristics: front axle: steel spring, rear axle: leveling control. Excluded COLT Rallyart up to 2009.
Please check your VIN: this kit fits: 10th character = letter A, B... Increased axle-load when using trailer (see approval). If a national individual type approval exist, it is necessary to approve a modification acceptance according to §19 / 2 StVZO. Without type: 1.6 Racing (DS3). "LPG (liquefied petroleum gas) system" engines included!
For vehicles with AMG suspension. Spring plate may be changed! - Kit E8530-140 may require OE-Spring-Plate No. Kits E8547-140 and E8550-140 may require OE-Spring-Plate No.
For vehicles with EDC (electronic damper control). Only Export - nor available in Germany - only without Components Certificate! Not for "Nürburgring Edition" (211 HP). For gasoline engine with manual gearbox.
For gasoline engine with automatic gearbox and diesel vehicle. Not for "ABC" (Active Body Control).
Only for vehicle with S-Line suspension. Only for vehicle without S-Line suspension. Only for vehicles without Sport Suspension Plus and without DRC - Dynamic Ride Control. Only for vehicles with Sport Suspension Plus including DRC - Dynamic Ride Control.
Original RGM bumper protection ABS black Dacia Sandero II also stepway from 2012. Original RGM bumper protection ABS black Ford Kuga I SUV estate 03.2008-02.2013. Original RGM bumper protection ABS black VW Golf VI Cabriolet from year of construction 03.2011. Original RGM bumper protection smooth ABS black VW T5 m. Original RGM bumper protection ABS black VW Caddy IV also Maxi from Bj.
Original RGM bumper protection ABS black VW Caddy painted bumper 2004-15. Original RGM bumper protection ABS black Opel Mokka X SUV from facelift 07.2016. 7 9 10 12 15 16 18 19 20 21 26 32 42 44 56 58 59 60 63 65 66 67 68 69 71 72 102 159 162 163 168 170 171 179 181 182 183 184 193 210 211 212 213 219 231 232 234 236 237 239 240 243 244 246 247 248 249 7 9 10 12 15 16 18 19 20 21 26 32 42 44 56 58 59 60 63 65 66 67 68 69 71 72 102 159 162 163 168 170 171 179 181 182 183 184 193 203 210 211 212 213 219 231 232 234 236 237 239 240 243 244 246 247 248 249. The item "Eibach Pro-Kit Chassis Springs VW Passat Saloon B6 3C 3C2 2005-10 1180/1160kg" is in sale since Saturday, September 14, 2019.
This item is in the category "Vehicle Parts & Accessories\Car Parts\Suspension & Steering\Coil Springs". The seller is "spangenberg-shop" and is located in Wedel, Schleswig-Holstein. This item can be shipped to all countries in Europe.
- Placement on Vehicle: Front
- EAN: 4050278007948
- Reference OE/OEM Number: A1120915US
- Manufacturer Part Number: E10-85-016-02-22-A
- Country/Region of Manufacture: Germany
- Reference Number OE: Vehicle Styling, Tuning, Chassis Springs, Lowering Springs, Kit
- Manufacturer Warranty: 2 Years
- Product Type: Chassis Springs
- Unit Quantity: Set Of 4
- Unit Type: Suspension
- Manufacturer: Eibach
- Brand: Unbranded