Eibach Pro-kit Chassis Springs For Bmw 1er E81 Hatchback 2006-2012 920/1060 Kg
Axle load in kg front / rear: Max. Axle load in kg front / back: 920/1060. Lowering in mm front / rear approx. Lowering in mm front / back approx.
Motor types: Motor Types: 116 d / 118 d / 120 d / 123 e / 130 i. Expert report / ABE: Certificate / ABE: with certificate registration required! Cardboard in mm: Cardboard packaging in mm: 636x377x170. Weight in kg net / gross: Weight in kg net / large: 9,600 / 10,100. Notes: please read the yellow table below! Hints: Please read below the yellow table!
The first choice of motorsport fans from all over the world. Eibach Pro-Kit Performance Springs # 1 Choice of Automotive Enthusiasts Worldwide! Example of a vehicle registration.
How do I check if this item is right for my vehicle? Three simple steps that you can check yourself with the help of your registration certificate and the vehicle registration document.
An example of a new registration certificate can be found as a sample image of the item description added above. First With the four-digit HSN (MPN) and the 3-digit TSN (Type key number, the first 3 characters) You can check which items from our shop fit on your vehicle and are suitable for you.
See entry above in the vehicle list! These numbers can be found under 2.1 and 2.2 in your registration certificate Part I (vehicle registration), in our picture above in Red highlighted.
Second Please check the following Axle loads front and rear , and compare these with our description. In your registration certificate (vehicle registration) these are under 7.1 and 7.2 listed. (In the example picture "Vehicle license" above you will find this in blue marked). If different or you are unsure, please ask our qualified service team!
Note table: Please refer to the product description above for applicable information. A L L G e M e i n e H i n IN e i S e.
German: Unless specifically stated, the suspension specified in the catalog will be reduced by the amount of factory lowering for vehicles fitted with a sports suspension ex works. Unless specifically stated, vehicles that are factory fitted with a higher chassis (eg off-road character, crossover, or poor-road pacts) are excluded from use of our products. For the article / vehicle classification, the details in the parts report or the ABE are decisive.
For this, among other things, the EC-type approval number point K in the vehicle registration or on the nameplate of the vehicle to find! To compare with the information in the report. Please check before assembly by means of parts certificate / ABE whether the delivered articles (see part marking) are approved for your vehicle (see application area). We recommend installing our products only in a qualified workshop, which has the appropriate trained personnel and the required special tools.
You can "read off" the mounting position on the print - have the spring installed so that you can read the print. The number must not be upside down. After the assembly of the spring / suspension components it is absolutely necessary to check the wheel settings. If the series shock absorbers are no longer fully functional and noticeably less effective, we strongly recommend replacing them with new series shock absorbers or sports shock absorbers.
Depending on the engine, gear, equipment and tolerances of the vehicle, the lowering some mm may vary from the specified values. The degree of lowering is always reduced by the amount of a factory lowering. The usability of our products refers to standard-fit vehicles. For conversions and special accessories also applies to standard accessories! , Such as the installation of a special brake system (eg ceramic brake system), wheel-Zenralverschluss, sports suspension, LPG system, etc. Our products may not be used. The dimensions given refer to standard new vehicles. Measuring points: Vertical distance from the center of the wheel hub to the lower edge of the fender.
Basically, the specified dimensions are nominal values, which can vary depending on the vehicle. If the standard suspension has electronic damper control, its functionality is eliminated when using B12 or Pro Street S chassis.
The error message displayed in the on-board computer can be turned off by an authorized workshop. If available for your vehicle, we recommend using Pro-Tronic to suppress the error message. The factory installed spring plates are available in thicknesses 8-23mm in DB-Fachwerkstätten. As a result, the lowering specified here can be varied.
For tires 205/50/15 and rim 7 J x 15 - Recommendation: Assembly of identical sports gas pressure shock absorbers. If required, contact source at our central office. Not suitable for factory lowering. The special equipment considered here includes the following point system: Air conditioning 7 points Automatic transmission 4 + 5 cyl. 4 points Automatic transmission 6 cyl.
2 points Additional heating 3 points Sunroof 2 points ABS 2 points Airbag 1 point Headlight cleaning system 1 point Motor protection 1 point Electronic seat adjustment 2 points Arise from the composition of the additional equipment more than 4 additional points , the lowering kit is to be used for vehicles with special equipment. The choice of rubber pads results from the following values: Up to and including 7 points 8 mm (1 pimple) Up to and including 13 points 13 mm (2 pimples) Up to and including 21 points 23 mm (4 pimples) More than 21 points The lowering kit is not suitable for this version.
Except vehicles with level control. On vehicles with 6-cylinder engines, a conversion to sport damper is required. Except for vehicles with electronic suspension adjustment.
For a lowering of more than 40 mm and a diameter of the right drive shaft greater than 42 mm, eventl. The series stabilizer to be replaced. The stabilizer set required here is available from Eibach part no.
E40-85-005-01-10 in well-stocked specialist shops. Except for the special models "Sportive" and "Sport" (vehicles with Bilstein dampers). The spring-loaded brake pressure regulator on the rear axle must be checked in accordance with the specifications of the workshop manual and readjusted if necessary. The shock absorbers of the HA are to be replaced by the included dampers. For vehicles with combined front fog lamp and front position lamp, check that the lower edge of the headlamp is lower than 350 mm above the ground. If this is the case, additional marker lights must be installed above this dimension. The standard lights should then be put out of operation by removing the bulb and releasing the cable connection. Not suitable for model variant "Cross".
If a single operating permit is available, an acceptance according to §19 / 2 StVZO is required. Not suitable for version 1.6 Racing (DS3).
Not for "Caddy Maxi" version. Also for "LPG" version (gas system). Only for vehicles with PASM (electronic damper control).
For vehicles with multi-link rear suspension (independent suspension). For vehicles with torsion beam rear axle (rigid axle). Vehicles of category M1G (off-road vehicle) must be rewritten as M1 vehicles (passenger cars). For vehicles without AMG chassis. For vehicles with AMG suspension. Spring plate may need to be replaced. With set E8530-140, the existing spring plate must be replaced with original spring plate no. For sets E8547-140 and E8550-140, the existing spring plate may need to be replaced with original spring plate no. Only for vehicles without air suspension.
Only for export, not available in Germany. Not for "Nürburgring Edition" (211 hp). For petrol engines with manual transmission. For gasoline with automatic transmission and Diesel vehicles.
For vehicles without ABC (active body control). Only for vehicles with standard S-Line suspension. Only for vehicles without standard S-Line suspension. Only for vehicles without Sports Suspension Plus without DRC - Dynamic Ride Control.
Only for vehicles with sports suspension Plus with DRC - Dynamic Ride Control. Not for execution "Tiguan Allspace". Only for vehicles with range extender.
C O M M O n n O T e S. If not separately named, vehicles with OE-lifted suspension (eg off-road package, crossover) are excluded from use of our products. The specifications indicated in the approval are for the classification of the item / vehicle.
Please check the type approval number of your car and compare with the approval. Letter K in your vehicle registration certificate or to find at the type plate of your car! (Please see marking) are approved for your vehicle (please see area of use).
Mounting - we recommend to have our system installed by a qualified workshop only. Mounting position - you can read the imprint.
The applicability of our standard cars deals. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (eg ceramic brakes), sport-suspension, LPG (liquefied petroleum gas) system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel to the bottom edge of the mud wing.
Generally the stated measurements are nominal values, which can vary depending on each car. If your vehicle has serial damper control this will not be any longer while using the B12 or Pro Street S suspension kit. You want to see a trouble code. This can be re-programmed by an official garage / dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.
This allows to vary the amount indicated here. For tire equipment 205/50/15 and rim 7J x 15. Recommendation: installation of sports gas pressure shock absorbers of similar construction. Part number is available only from our special distributor.
Please ask for availability and price. Contents following point system: air condition 7 points automatic-transmission 4 + 5 Cyl. 4 points automatic-transmission 6 cyl. 2 points independent car heating 3 points sunroof 2 points ABS 2 points Airbag 1 point headlamp cleaning system 1 point engine skid plate 1 point electronic seat adjustment 2 points IF THE RESULT IS MORE THAN 4 POINTS ONE HAS TO CHOICE up to 7 points 8 mm (1 point rubber plate) up to 13 points 13 mm (2 point rubber plate) up to 21 points 23 mm (4 point rubber plate) More than 21 points the lowering kit is not possible. Vehicles with 6 cylinder engine require retrofit with sports shocks. When the car is lowered to 40mm in combination with a drive shaft diameter more than 42mm, the original equiped front stabilizer bar has been replaced by the EIBACH Anti-Roll Kit part. Exceptional models "Sportive" and Sport (models were equipped with Bilstein shock absorbers). If necessary, adjusted according to the workshop manual.
The original rear dampers have been replaced by the supplied dampers. The height of the lower edge of the vehicle is 350 mm to the ground. In this case, the height has increased to 350 mm. The original running lights have been decomissioned by removing the bulbs on the cable connection.
Not suitable for model "Cross". Only for vehicles with following characteristics: front axle: steel spring, rear axle: leveling control.
Colt Rallyart up to 2009. Please check your VIN: this kit fits: 10th character = letter A, B... Increased axle-load when using trailer (see approval). If a national individual type approval exists, it is necessary to approve a modification according to §19 / 2 StVZO. Without type: 1.6 Racing (DS3).
"LPG (liquefied petroleum gas) system" engines included! Only cars with PASM (electronic damper control).
For cars with independent suspension at the rear axle. For cars with rear live axle. Vehicles of the category M1G (Offroad) must be reclassified as M1.
For vehicles without AMG suspension. Spring plate may be changed! - Kit E8530-140 may require OE Spring Plate No. Kits E8547-140 and E8550-140 may require OE Spring Plate no.
For vehicles with EDC (electronic damper control). Only Export - nor available in Germany - only without Components Certificate! Not for "Nürburgring Edition" (211 HP). For gasoline engine with manual gearbox.
For gasoline engine with automatic gear box and Diesel vehicle. Not for "ABC" (Active Body Control). Only for vehicle with S line suspension.
Only for vehicle without S line suspension. Only for vehicles without Sport Suspension Plus and without DRC - Dynamic Ride Control. Only for vehicles with Sport Suspension Plus including DRC - Dynamic Ride Control.
Only for vehicle with range extender. Products that may be of interest to you. Eibach Pro-Kit springs for BMW 3 Series E46 Limo 0. Original RGM bumper protection ABS black Dacia Sandero II also Stepway from 2012.
Original RGM bumper protection ABS black VW Caddy IV also Maxi from year 05.2015. Original RGM bumper protection ABS black VW Caddy painted bumper 2004-15. Original RGM bumper protection ABS black Opel Mokka X SUV from facelift 0 7.2 016. The item "Eibach Pro-Kit Chassis Springs for BMW 1er E81 Hatchback 2006-2012 920/1060 KG" is in sale since Sunday, September 15, 2019. This item is in the category "Vehicle Parts & Accessories\Car Parts\Suspension & Steering\Coil Springs". The seller is "spangenberg-shop" and is located in Tornesch, Schleswig-Holstein. This item can be shipped to all countries in Europe.
- Placement on Vehicle: Front
- EAN: 4050278001571
- Reference OE/OEM Number: A1120915N
- Manufacturer Part Number: E10-20-013-02-22-A
- Country/Region of Manufacture: Germany
- Reference Number OE: Tuning, Chassis Springs, Lowering Springs, Lowering Springs, Kit
- Manufacturer Warranty: 2 Years
- Product Type: Chassis Springs
- Unit Quantity: Set Of 4
- Unit Type: Suspension
- Manufacturer: Eibach
- Brand: Unbranded