Eibach Pro-kit Chassis Springs For Audi A6 Avant 4f5 C6 03.05-08.11 1215/1240
Eibach Pro-Kit Chassis Springs for Audi A6 Avant 4F5 C6 03.05-08.11 1215/1240. The description of this item has been automatically translated. Eibach Pro-Kit Performance suspension springs for. Eibach Pro-Kit Performance Springs for. Axle load in kg front / rear: Max.
Axle load in kg front / back: 1215/1240. Lowering in mm front / rear approx. Lowering in mm front / back approx.
Cardboard box in mm: Cardboard packaging in mm: 636x377x170. Weight in kg net / gross: Weight in kg net / large: 15,800 / 16,300. Notes: Please read the yellow table below! Hints: Please read below the yellow table! The first choice of motorsport fans from all over the world. Eibach PRO-KIT Performance Springs # 1 Choice of Automotive Enthusiasts Worldwide! Example of a vehicle registration. How do I check if this item is correct for my vehicle? Three simple steps that you can check yourself with the help of your registration certificate and the vehicle registration document. An example of a new registration certificate can be found as a sample image added to the item description above. With the four-digit HSN (MPN) and the 3-digit TSN (Type code number, the first 3 characters) you can check which items from our shop fit your vehicle and are suitable for you. See entry above in the vehicle list!
If different or you are unsure, please ask our qualified service team! Note table: Please refer to the product description above for the relevant information. German: If not specified separately, the lowering specified in the catalog is reduced by the amount of the factory lowering for vehicles equipped with a sports suspension ex works.
If not listed separately, vehicles that are equipped with a higher chassis ex works e. Off-road character, crossover or rough road packages are excluded from the use of our products. For the article / vehicle assignment, the information in the parts certificate or ABE is decisive. For this purpose, the EC type-approval number point K on the vehicle registration certificate or on the vehicle's nameplate! Must be compared with the information in the report. Before installation, please check by means of a parts certificate / ABE whether the delivered items (see parts identification) are approved for your vehicle (see area of application). We recommend that our products be installed only in a qualified workshop that has the appropriate trained personnel and the required special tools. You can "read" the installation position from the printing - have the spring installed so that you can read the printing. The number must not be upside down. After the spring / chassis components have been installed, it is imperative to check the wheel settings.
If the series shock absorbers are no longer fully functional and have noticeably weakened in their effect, we strongly recommend replacing them with new series shock absorbers or sports shock absorbers. Lowering performance is negatively affected by worn or defective dampers. If you need new dampers, we would be happy to advise you. With Sportline springs we recommend the installation of sports shock absorbers such as Bilstein B8.
All wheels / tire combinations that have been approved by the wheel type inspection centers can be used. The conditions in the wheel report or Wheels ABE are to be observed, with the exception of the requirement for series chassis. Depending on the engine, transmission, equipment and tolerances of the vehicle, the lowering may deviate by a few mm from the specified values.
For conversions and special accessories also applies to series accessories! Such as the installation of a special brake system e. Ceramic brake system, central wheel lock, sports suspension, LPG system etc. Our products may not be usable.
Basically, the specified dimensions are target values, which can vary depending on the vehicle. If the standard suspension has electronic damper control, its functionality is not available when using B12 or Pro Street S suspensions. An authorized workshop can turn off the error message displayed in the on-board computer. If available for your vehicle, we recommend using Pro-Tronic to suppress the error message.
The factory installed spring plates are available in 8-23mm thickness in DB specialist workshops. This allows the lowering specified here to be varied. With 205/50/15 tires and 7 J x 15 rims - recommendation: installation of identical sports gas pressure shock absorbers. If necessary, please request a source from our central administration. Not usable with lowering at the factory.
The special equipment considered here includes the following points system: Air conditioning 7 points automatic transmission 4 + 5 cyl. 4 point automatic transmission 6 cyl.
2 points of additional heating 3 points of sunroof 2 points of ABS 2 points of airbag 1 point of headlamp cleaning system 1 point of motor protection 1 point of electronic seat adjustment 2 points of the combination of the additional equipment more than 4 additional points , the lowering kit is to be used for vehicles with special equipment. The choice of rubber pads results from the following values: Up to and including 7 points 8 mm (1 stud) Up to and including 13 points 13 mm (2 studs) Up to and including 21 points 23 mm (4 studs) More than 21 points The lowering kit is not suitable for this version. Except vehicles with level control. Vehicles with 6-cylinder engines must be converted to sport dampers.
The suspension-dependent brake pressure regulator on the rear axle must be checked in accordance with the specifications in the workshop manual and, if necessary, be reset. The dampers of the HA are to be replaced by the supplied dampers. On vehicles with a combined fog lamp and position lamp, check whether the lower edge of the headlamp is lower than 350 mm above the ground. If this is the case, additional position lights must be installed above this dimension. The standard position lights must then be deactivated by removing the light bulb and disconnecting the cable connection.
Not suitable for model variant "Cross". Only for vehicles with the following properties: VA: steel spring, HA: level control. Not suitable for Colt Rallyart version from 2009. Check: this kit fits: 10. Digit = letter A, B....
Also for version "LPG" (gas system). Only for vehicles with PASM (electronic damper control). For vehicles with multi-link rear axle (independent wheel suspension). For vehicles with torsion beam rear axle (rigid axle).
Category M1G vehicles (off-road vehicles) must be rewritten as M1 vehicles (passenger cars). For vehicles without AMG chassis.
Not for "Nürburgring-Edition" (211 PS). For petrol engines with manual transmission.
For petrol engines with automatic transmission and diesel vehicles. For vehicles without ABC (Active Body Control). Only for vehicles with S-Line chassis as standard.
Not for "plug-in hybrid" version. Service information: Please refer to the product description above for applicable instructions. If not separately named, vehicles with OE-lifted suspension (eg Offroad-Package, Crossover) are excluded from use of our products. The specifications indicated in the approval are for the classification of the item / vehicle. Please check the type approval number of your car and compare with the approval.
Letter K in your vehicle registration certificate or to find at the type plate of your car! Mounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available.
Mounting position - you can read the mounting position of the springs from the imprint - have them installed just the way you read the imprint. Wheel adjustment - after completion of the spring / suspension installation, checking the wheel adjustment is required. Shock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers. The performance of new lowering suspension will be with no optimum result by using old, strong used or broken shock absorbers. If you need news shock absorbers we could support you if necessary.
The applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (eg ceramic-brakes), sport-suspension, LPG- (liquefied petroleum gas) -system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car. If your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit.
You will see a trouble code. This can be re-programed by an official garage / dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code. This allows to vary the lowering indicated here. For tire equipment 205/50/15 and rim 7J x 15.
Recommendation: installation of sports gas pressure shock absorbers of similar construction. Part number is available only from our special distributor. Please ask for availability and price. The special equipment mentioned below contents following point system: air-condition 7 points automatic-transmission 4 + 5 cyl.
4 points automatic-transmission 6 cyl. 2 points independent car heating 3 points sunroof 2 points ABS 2 points airbag 1 point headlamp cleaning system 1 point engine skid plate 1 point electronic seat adjustment 2 points IF THE RESULT IS MORE THAN 4 POINTS ONE HAS TO CHOICE up to 7 points 8 mm (1 point rubber plate) up to 13 points 13 mm (2 point rubber plate) up to 21 points 23 mm (4 point rubber plate) More than 21 points the lowering Kit is for this version not possible. Vehicles with 6 cylinder engine require retrofit with sports shocks.
The spring travel dependent brake-pressure regulator at the rear axle has to be inspected and, if necessary, adjusted according to the workshop manual. The original rear dampers have to be replaced by the supplied dampers. Vehicles with combined fog and running lights have to be checked whether the height of the lower edge of the light is not closer than 350 mm to the ground.
Please check your VIN: this kit fits: 10th character = letter (A, B. Increased axle-load when using trailer (see approval).
If a national individual type approval exist, it is necessary to approve a modification acceptance according to §19 / 2 StVZO. Without type: 1.6 Racing (DS3).
For cars with rear live axle. Vehicles of the category M1G (Offroad) must be reclassified as M1. For vehicles without AMG suspension. For vehicles with AMG suspension. Spring plate may be changed! - Kit E8530-140 may require OE-Spring-Plate No. Kits E8547-140 and E8550-140 may require OE-Spring-Plate No. For vehicles with EDC (electronic damper control). Only Export - nor available in Germany - only without Components Certificate!
For gasoline engine with automatic gearbox and diesel vehicle. Not for "ABC" (Active Body Control). Only for vehicle with S-Line suspension. Only for vehicle without S-Line suspension. Only for vehicles without Sport Suspension Plus and without DRC - Dynamic Ride Control.
Only for vehicles with Sport Suspension Plus including DRC - Dynamic Ride Control. Only for vehicle with range extender. Articles you may still be interested in.
Eibach Pro-Kit suspension springs for BMW 3 Series Limo E46 02.1998-04.2005 970/1100 kg. Original RGM bumper protection ABS black Dacia Sandero II also stepway from 2012. Original RGM bumper protection ABS black Ford Kuga I SUV estate 03.2008-02.2013. Original RGM bumper protection smooth ABS black VW T5 m. Original RGM bumper protection ABS black VW Caddy IV also Maxi from Bj. Original RGM loading edge protection smooth ABS black VW T6 VI with tailgate 04.2015. Original RGM bumper protection ABS black VW Golf VI Cabriolet from year of construction 03.2011. Original RGM bumper protection ABS black Opel Mokka X SUV from facelift 07.2016. GERMAN ENGLISH 7 9 10 12 15 16 18 19 20 21 26 32 42 44 56 58 59 60 63 from addendum 14 65 66 67 68 69 71 72 102 For camper designs 159 without EDC 162 163 168 170 171 179 181 182 183 184 193 210 211 212 213 Spring curl up 219 231 232 234 236 237 239 240 243 244 246 247 248 249 A. CommonNotes 7 9 10 12 15 Not fully equipped. 16 18 19 20 21 26 32 42 44 56 58 59 60 63 from supplement 14 65 66 for 5-seaters 67 for 7-seaters 68 69 71 72 102 For campmobiles 159 without EDC 162 163 168 170 171 179 181 182 183 not for "STI" 184 193 203 210 211 long wheel base 212 213 Pigtail end above 219 Not for "Trailhawk" 231 232 234 236 237 239 240 243 244 246 247 248 249 VAT.
The item "Eibach Pro-Kit Chassis Springs for Audi A6 Avant 4F5 C6 03.05-08.11 1215/1240" is in sale since Thursday, September 12, 2019. This item is in the category "Vehicle Parts & Accessories\Car Parts\Suspension & Steering\Coil Springs". The seller is "spangenberg-shop" and is located in Wedel, Schleswig-Holstein. This item can be shipped to all countries in Europe.
- Placement on Vehicle: Front
- Unit Type: Suspension
- EAN: 4050278001076
- Manufacturer Part Number: E10-15-008-05-22-A
- Country/Region of Manufacture: Germany
- Reference Number OE: Tuning, Combi, Chassis Springs, Lowering Springs, Performance, A6
- Manufacturer Warranty: 2 Years
- Unit Quantity: Set Of 4
- Tipo de marca: Chassis Springs
- Manufacturer: Eibach
- Brand: Unbranded